Try to clean the I/O "Microcontroller"I got this lanix neuron r laptop, the point is that it only turns on by holding the power button and if it is released the computer turns off. the button works correctly and I changed it and it remains exactly the same. attached video
Can you put the part number of this motherboard.I got this lanix neuron r laptop, the point is that it only turns on by holding the power button and if it is released the computer turns off. the button works correctly and I changed it and it remains exactly the same. attached video
yes is MB40II4 RJ45 rev: c yhe motherboard is MB40IA1 rev:01Can you put the part number of this motherboard.
Where is that controller or how do I find it?Try to clean the I/O "Microcontroller"
U1 : NAME OF IC IS IT8518 , NEED TO CHECK PIN16 PM_PWRBTN# .Where is that controller or how do I find it?
IS THERE A SCHEMATIC OF THIS MOTHERBOARD TO FIND IT?U1 : NAME OF IC IS IT8518 , NEED TO CHECK PIN16 PM_PWRBTN# .
IS THERE A SCHEMATIC OF THIS MOTHERBOARD TO FIND IT?
II will try to find it, I will see if I am successful, thank you. in case you can't find anything, do you have any other idea what it might be?[URL unfurl = "true"] https://www.repairlap.com/threads/uniwill-mb40ia-b1-phase-schematic-bios.7986/ [/ URL]
You need to check the I/o it8518 it self especially pin 16 .II will try to find it, I will see if I am successful, thank you. in case you can't find anything, do you have any other idea what it might be?
You need to check the I/o it8518 it self especially pin 16 .Is it normal for a value of 0.510 with power?