HP Omen da0g3dmbce0 rev e ,Not Power

Usr0104

Member (✔)
Joined
Feb 11, 2021
Messages
52
good morning, I need help regarding an HP Omen laptop, which does not turn on, I cannot find a diagram in the forum, I have the 3V source active but I cannot find the 5V source, I have 3.2V on the power button, and close of EC 3.2, but nevertheless I can not advance more
 
Send a clear picture for the both side of your Mainboard.
 
There is two place where you should found 3v and othere should have 5v and it's not easy to see that from your pictures.
 
Voltage
 

Attachments

  • PXL_20220831_195847446.jpg
    PXL_20220831_195847446.jpg
    480.6 KB · Views: 6
Can you send the part number of those two chip on picture above .
 
O
 

Attachments

  • PXL_20220831_221531062.jpg
    PXL_20220831_221531062.jpg
    5.3 MB · Views: 7
  • PXL_20220831_221547075.jpg
    PXL_20220831_221547075.jpg
    5.7 MB · Views: 3
Check the pwbtn RSMRST and DNSBWON on the I/O if it's available when you power on .
 
It8987e it's the I/O Do a search for its datasheet than found rmrst and other signals if they are available when you power on your lap .
PXL_20220831_195857445.jpg
 

Latest posts

Back
Top Bottom